VANABIO® AS1410H is a methacryl-functional silane; it is a clear, light and heat sensitive liquid with a faintly sweet odour.
VANABIO® AS1410H acyl silane is used as adhesion promoter at organic/inorgainc interfaces, as surface modifier (e.g. imparting water repellency, organophilic surface adjustment) or as crosslinking of polymers). It is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture.
It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and in filled or reinforced thermoplastic silicon based polymers, including polyolefins and polyurethanes. It is also used to functionalize resins via radical initiated processes - copolymerization or grafting - and to modify surfaces. Compared with VANABIO® PC4100, AS1410H is more clear, purity is higher, and Chloride is lower.
CAS No. | 2530-85-0 |
EINECS No. | 219-785-8 |
Formula | C10H20O5Si |
Molecular Weight | 248.35 |
Viscosity 25°C | 2 cSt |
Boiling Point | 255°C [760mmHg] |
Flash Point | 108°C |
Appearance | Clear liquid |
Color(APHA) | Max.10 |
Density 25/25°C | 1.045 |
Refractive Index | 1.430 [25°C] |
Min. Purity | 99.5% |
Hydrolyzable Chloride | Max.2ppm |
Solubility: VANABIO® AS1410H is soluble in methanol, ethanol, isopropanol, acetone, benzene, toluene, and xylene. After hydrolysis, it is soluble in water with adequate stirring if the pH is adjusted to 4.0. Hydrolysis releases methanol.
VANABIO® AS1410H shows copolymerization or grafting reactions when catalyzed by (organic) initiator systems, e.g. peroxides or by radiation (e.g. UV).
Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.
I Accept